This entry was posted
on Sunday, April 26th, 2009 at 9:42 am and is filed under Belkin Router.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
hey!! can you tell me why when i set up the password for the wireless connection, my lap top can not get access to the connection, even when I followed all the steps
yo i need help. this isnt related to your vids but thought you might know a lil something. when you go to the site 192.168.2.1 it says to logn and such. well i dont remember setrting any password and when i tried the passwords i set up on the site, it says character’s too long. so if you could help me with that that be a big help thanks in advance .5/5
Some routers from different brands (i.e. Netgear, Motorola, etc) have different default password for the administration setting so if you have belkin then the default password is blank (no password)
when i press drop down for security mode it doesnt say WPA/WPA2 Personal thing just WPA-PSK (no server n 128 bitwep and 64bit wep and WPA with radius server can u tell me wat to do from here so i can have a personal password thanks.
yes off course but since you have the router you can simply press the reset button in the back of the router and get rid of the password (If some1 else did this and set a password!)
Hi, i have a Belkin G+ Router i have wrote cmd in search the only thing that comes up is Ethernet wireless connection and some tunnel ones but dosnt say wireless, what do i have to do?
Yo thank man, you helped me out man a lot.People were stealing my connection for the only longest.Now they can’t steal it no more;Thanks to you.Thanks again
hey!! can you tell me why when i set up the password for the wireless connection, my lap top can not get access to the connection, even when I followed all the steps
yo i need help. this isnt related to your vids but thought you might know a lil something. when you go to the site 192.168.2.1 it says to logn and such. well i dont remember setrting any password and when i tried the passwords i set up on the site, it says character’s too long. so if you could help me with that that be a big help thanks in advance .5/5
PLEASE HELP ME!!
I cant get onto the settings page on my Belkin router please help me ……..
Very clear, concise, helpful video. Thank you very much!
Thanks!
Just go to cmd and type
ipconfig then hit enter
this will show all information about the network and net connection
look for ” Default Gateway”
It shoul be some numbers (IP) : 192.168.X.X
copy this number (or memorize it!) to the web browser and hit enter
All explained in the vid just replay it slowly!
Good Luck
Some routers from different brands (i.e. Netgear, Motorola, etc) have different default password for the administration setting so if you have belkin then the default password is blank (no password)
yea it was blank but i was stupid enough to set a pass on it and i didnt remember. but my dad resetted it so thanks anyway
when i press drop down for security mode it doesnt say WPA/WPA2 Personal thing just WPA-PSK (no server n 128 bitwep and 64bit wep and WPA with radius server can u tell me wat to do from here so i can have a personal password thanks.
Just use whatever you have this option is only to choose different levels of encryption
WPA/WPA2 is the most secure one but WPA-PSK
is fine too
Just choose anything you have
Good Luck!
the people down strairs from me are using my internet and making it mad slow so lnow i have a password so im good ty soo much im subcribing
hey can you do a video on how to correctly change your password, itried but im not sure im doing it right,please
so like if my router had no password and some1 else is connected to it he culd do this and set a password ?
thank you!
yes off course but since you have the router you can simply press the reset button in the back of the router and get rid of the password (If some1 else did this and set a password!)
thanks
what password ?
u mean the router admin pass or the wireless connection pass?
u welcome
the wireless connection pass
Hi, i have a Belkin G+ Router i have wrote cmd in search the only thing that comes up is Ethernet wireless connection and some tunnel ones but dosnt say wireless, what do i have to do?
This video IS to set or change the password
If you have different router then the steps will be little different.
cmd is just the Windows command you can run it from start menu Go to start all programs
i just bought a belkin wireless g and i can set it up and when i use my laptop i can see it but it wont let me connect.
Help
thanks you i did the same steps this other day and it didnt work but i just reset the it and i was able to remake the password
Yo thank man, you helped me out man a lot.People were stealing my connection for the only longest.Now they can’t steal it no more;Thanks to you.Thanks again