7 Easy Steps to Secure Your Wireless Router
Accessing Your Wireless Router's Configuration
To gain access to your wireless router settings and configuration menu then connect to the router either wirelessly or via a Ethernet cable. Open a web browser and type either:
http://192.168.1.1 or
http://192.168.2.1
1) Change Admin password
Most wireless routers ship with a blank password. It is essential that this is changed else a potential hacker could get into your router configuration and lock you out of your own hardware.
2) Change The Network Name (otherwise known as the SSID)
The default network name is usually made up of the name/model of your wireless router. This information gives a head start for a hacker and makes it easier for them to break into your network. Don't rename it to something like your surname or house name as this unnecessarily exposes personal information. Rename it to an alpha-numeric string - this can be up to 32 characters long.
3) Turn off SSID broadcasting
By default, a wireless router's SSID is broadcast so anyone in the vicinity of your wireless router can see that it. SSID broadcasting can be turned off thus making your wireless router virtually invisible.
4) Enabling Encryption
This is switched off by default. There is a choice of WEP, WPA and WPA2. Currently the latest encryption method is WPA2 so use this where possible. Both your wireless router and wireless PC adaptor must be configured to use the same encryption.
5) Mac Address Control
All hardware has a unique MAC address associated with it, including your PC adaptor card. This MAC address can be added to access control list in the wireless router. Only devices added to the router's access control list are allowed to be connected.
6) Update router firmware
It is recommended that the latest router firmware is downloaded from the manufacturer's website and installed in the router. This will hopefully fix any bugs that have been found for your router and also help with any known security flaws in the router itself.
7) Backup settings
Finally, backup all router settings. If you reset the router back to its factory default settings for whatever reason, your configuration can later be easily and quickly restored back into the router.
By: andyj00
Article Directory: http://www.articledashboard.com
Andy Jones is a technology expert with a broad range of hardware and software skills. To read more tips and techniques like the ones in this article, go to: http://www.setupwirelessrouter.com
Routers Articles
Article Keywords:
Routers |
|
A Quick Note
From The Publisher...
If you like the article above, you may be
interested in the following article which is also related to Routers...
|
Wired Network Working Into Wireless Access Points |
|
Let's dive into something a little more complex. What if you
have a wired network already, and you're quite happy with the
way it performs -- you see no point in dismantling it and making
it wireless when it works fine as it is. You've got this laptop,
though, that you'd really like to use wirelessly. Basically,
what you want to do is make a wireless connection to a wired
network. This is often referred to as a network bridge.
As luck would have it, there's a very easy way to do exactly
what you want. It's called a wireless access point.
Partly Wireless
If you've got a lot of computers (on an office network, for
example) and you can't switch them all over to wireless
networking at once, installing a wireless router is a good way
of doing it bit-by-bit. Once the router is part of the network,
you could just remove one network wire per day or per week,
replacing it with a wireless connection.
Hardware and Software Requirements
There are two kinds of... |
|
|
|
|

Routers, Computer Networking News |
|
|